Valve blocks

VS 100, VS 200, VS 300, VS 500

Клапанные блоки VS

One- and two-valve blocks (VS100, VS 200) allow connection of gauge and absolute pressure transmitters to pulse lines of technological processes. Three- and five-valve blocks (VS 300, VS 500) allow connection of differential pressure transmitters to pulse lines of technological processes.

PDF fileVS 100, VS 110, VS 120, VS 200 Valve Blocks Technical Documentation

PDF fileVS 300, VS 500, VS 501 Valve Blocks Technical Documentation

PDF filePulse Tubes to Valve Blocks Connection Diagrams

PDF fileVS 100, VS 110, VS 120, VS 200 Order Code Tables

PDF fileVS 300, VS 500, VS 501 Order Code Tables

 


Pressure snubbers

TTR1 ... TTR9

Pressure snubber

TTR series pressure snubbers protect gauge and absolute pressure transmitters from short-term pressure surges that greatly exceed the designed upper range limit. Various mechanical connections available, both for transmitter and process: G½ ", G1A", M20x1.5

PDF filePressure Snubbers Technical Documentation

 


HART Modems

MH-02 (COM), HI 321 (USB)

HART-модем

HART modems and the accompanying software allow configuring smart HART-enabled pressure transmitters HMR 331, DMD 331-A-S, LMK 358H, X | act i.

PDF fileModems and Clamps Technical Documentation

 


Configurators

ADAPT-100

ADAPT-100 configurator

ADAPT-100 configurator allows switching spans of multirange pressure transmitters and adjustment of zero of the analog unified current signal 4 ... 20 mA.

ADAPT-100 has a polycarbonate housing; its enclosure protection rating is IP40. The configurator's cable ends in a DIN 43650 connector that fits 4 ... 20 mA transmitters; there are five control buttons to the device: ON/OFF, ZERO TRIM zero adjustment button and three span selection buttons. There are also six indicators on the configurator's control panel: POWER, LINK, ERROR and three span indicators.

The configurator has two modes of operation: configuration mode and calibration mode.

PDF fileADAPT-100 Technical Documentation

 

ADAPT-1, ADAPT-3

ADAPT-3 configurator

ADAPT-1 (COM) configurator and the accompanying software allow configuring DMP 331i / 333i, LMP 331i / 308i transmitters. ADAPT-3 (COM) configurator and the accompanying software allow configuring DS 4/DS 6 pressure switches.

PDF fileConfigurators, Modems, Clamps Technical Documentation

 


Clamps for submersible transmitters

SVOP, SVON

Transmitter securing clamp

SVOP - galvanized clamp, SVON - stainless steel clamp. Diameter of clamped cables -- 6 to 15 mm.

PDF fileModems and Clamps Technical Documentation

 


Pulse tubes

U-shaped, circular

Pulse tubes

Pulse tubes decrease medium temperature. Operating pressure -- up to 25 MPa. Operating temperature -- up to 300 °С. Material -- carbon steel or stainless steel. Transmitter mechanical connection -- M20x1.5.

PDF filePulse Tubes Technical Documentation

 


Termination boxes

KL1, KL2

Termination boxes

Termination box encloses hydrometric cable of submersible level transmitters and the reference atmospheric pressure tube.

  KL1 KL2
Number of signal lines 2 (4-20mA)
Housing Aluminum Plastic
Cable gland M16x1.5, material - polyamide, seal - NBR
Enclosure rating IP 66
Wire cross-section up to 2.5 mm2
Clamped cable diameter 5…10 mm
Weight 550 g 220 g
Options temperature converter (for Pt100)

PDF fileData Sheet for Termination Boxes and Power Supply Units 


Power supply units

AGP

Блок питания AGP-12-2

Stabilized power supply units deliver electricity to low-power devices as part of industrial-grade control setups.

  AGP-12-2 AGP-24-1 AGP-24-0.03x2
Type Pulse Linear
Rated input voltage 220V ± 20%
Number of DC outputs 4 uninsulated 2 insulated
Rated output voltage 12V 24V 2x24V
Maximum load current 2A 1A 2х30mA
Permissible temperature range -20…+60°С
DIN rail type 35x7.5mm
Weight 0.2kg

PDF fileTermination Boxes and Power Supplies Technical Documentation